 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
First off, I don't want to come across as sounding mean or insulting in any way. But if you need the answer to this question, it sounds to me that you should perhaps be seeking the help of a licensed electrician. It is quite a simple job, but you need the basics to achieve such for if nothing else your personal safety.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker
I want to replace an old fuse box with a circuit breaker panel. Do I need a 200 AMP service? (considering putting in air conditioning in the future). The house has two apartments so I want to make sure there is adequate service. As I know absolutely nothing about this, what questions should I...
How can I upgrade my circuit breaker from 15 amps to 20 amps? I recently installed recessed lighting in my kitchen, adding much needed light, but sometimes the lights flicker. If I reset the circuit breaker, it stays on for days at a time, then eventually it starts flickering again. Can I...
Is it legal to feed a circuit breaker through a fuse box as long as the fuse can handle the load?
Excuse me, I did look at the code book as is suggested in your Sticky. The NFPA may answer this question, but I am not knowledgeable enough to recognize it: Our offices are upstairs in an older (renovated home) building with modern wiring. We have 4 computers, 3 printers, and miscellaneous with...
View more questions Search
|
