Ask Experts Questions for FREE Help !
Ask
    LECH's Avatar
    LECH Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2007, 01:53 PM
    Dayton fan pull switch wiring diagram
    I Have a Dayton 3 speed fan, the pull switch went bad. However when the old one was removed close attention was not given to the wiring. It is a two layer switch, with five wires coming out of the fan. The switch is a JIN YOU e70469, the Fan is a dayton 3c69oa. If anyone knows where I can find a wiring diagram to make sure I rewire the fan correctly, I would greatly appreciate it
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 17, 2007, 08:26 PM
    They still sell this fan, you might be able to obtain a wiring diagram from Dayton (Grainger) or from Marley MEP (who makes the fan for Dayton/Grainger).

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rotary switch wiring diagram [ 4 Answers ]

I purchased an old rotary switch, unfortunately without a wiring diagram. It has four settings (off, low, med, hi), and four wiring poles. Contacts rotate at two levels and connect the poles as shown in the attached JPG. My question is how to wire this thing (I assume there are three incoming...

Wiring diagram for replacing a ceiling fan switch [ 6 Answers ]

I have an Airmak AM207 ceiling fan. It has a 3 way switch with 4 wires. I am replacing the old switch and got the wires mixed up. What is the right order and color for L 1 2 3. The black is the line, grey goes to the reversing switch, purple and brown come out of the capacitor which is a Lung...

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

Converting pull switch lights to wall switch [ 3 Answers ]

I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...

Pull switch [ 2 Answers ]

Anyone know how to replace the cord in a pull switch? Thanks

View more questions Search