Ask Experts Questions for FREE Help !
Ask
    wiremanha's Avatar
    wiremanha Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2007, 08:05 AM
    Furnace won't stay on, when thermostatic calls for heat
    There is a roll over switch over the burner opening that keeps tripping and when you look at the burners the first one has overflow going around the bottom and top. Is this a adjustment of the pressure regulator on the control valve?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 17, 2007, 07:33 PM
    Check for a plugged vent/chimny. Something is preventing the flue gas outflow.
    tonelisa's Avatar
    tonelisa Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Dec 21, 2007, 05:46 AM
    My Furnace Does Not Stay On Long Enough To Heat My Home And Its Hard To Program The Thermostat?
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #4

    Dec 21, 2007, 02:16 PM
    You may have dirty or rusted out burners, remove the burners and inspect them, you should have a strong blue flame (no yellow, no shoot) This is a dangerous condition and should not be operated until it is repaired, Good luck, Mike
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat won't stay on [ 1 Answers ]

I have an electric heat/air unit. When I turn the heat on it only runs for about 7 sec. then shuts back off. It will kick off and on until I turn the unit off at the thermostat. It won't stay on long enough to feel if it is warm air or not. Please help! Is it the thermostat or something else?

Tibetan Spaniel, How long does it stay in heat? [ 2 Answers ]

We have recently acquired a Tibetan Spaniel, she is almost a year old and has gone into heat. How long will it last? :confused:

Furnace won't stay ignited [ 2 Answers ]

We just replaced our thermostat and ever since then the heat will come on and is ignited but still blowing cold air.

Furnace won't stay lit [ 1 Answers ]

Our Heil Furnace pilot light won't stay lit. When pilot knob is turned on, we can ignite the flame, but as soon as we release knob the pilot light goes out. We also replaced the thermo coupling and it still did not stay lit/worked. Could it be the valve/knob? Would any one have any suggestions?

Furnace won't stay on [ 1 Answers ]

I can't get my furnace to stay on unless I have it all the way up. I just replaced the thermostat what could be wrong

View more questions Search