Ask Experts Questions for FREE Help !
Ask
    jimhendren's Avatar
    jimhendren Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2007, 03:19 PM
    Generator to gas furnace
    We are with out power and have a generator, the generator ran my furnace for two days now the furnace is not run with the generator? I played with the ground wire and it worked for about 4 hours and now is no longer running again. Any suggestions?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 15, 2007, 03:48 PM
    Sounds like a wiring problem. Check over all the circuits.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Dec 15, 2007, 04:09 PM
    Newer furnaces seem to need a good ground. Make sure you have a good 3 wire, hot, neutral, and ground connection to the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace with Generator problem? [ 27 Answers ]

I have a York Two-Stage Deluxe Diamond (PDU) furnace that I have recently wired to a 6 CKT transfer switch (Reliance Controls) to use with my Coleman 6250 (5000watt) gas generator. All my ckts. Work well with the generator connected, except the furnace. I switched ckts on the transfer switch-no...

Furnace shuts down standby generator [ 7 Answers ]

I have installed a 16kW standby generator and I am having a problem with the furnace. It is a 10kW furnace and the rest of the generatoris running lights, outlets and a well pump. When the generator starts, everything is fine. Then about five minutes with the generator running, it trips the 65 Amp...

Furnace shuts down generator [ 15 Answers ]

I have installed a 16kW standby generator and I am having a problem with the furnace. It is a 10kW furnace and the rest of the generatoris running lights, outlets and a well pump. When the generator starts, everything is fine. Then about five minutes with the generator running, it trips the 65 Amp...

Generator Help [ 14 Answers ]

OK, next question. I have bought a 6000 watt generator. It has four 110 outlets and one 220 "twist style" outlet. What I want to do is wire it into my house temporarily during winter power outages. I know already it will not run my entire house. We have two sets of gas logs, so heat is not an...

Bryant Furnace won't start flame on my emergency generator [ 4 Answers ]

My newer Bryant plus 80 T gas furnace would not start the flame when it was connected to my emergency generator during an ice storm that caused the commercial power to go out. Is this a result of the poor power quality of the emergency generator which messed up the electronic circuits of the...

View more questions Search