 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Is the main valve and the water heater valve turned back on? Is it a gate valve? Is it old?
Many times a gate valve stem will break or simply shear the threads and not reopen. To open it you either have to turn the valve off prior to this one and bleed the pressure and remove the guts of the valve or open the valve while pressing hard on the handle to engage the stem. Or you can replace the valve altogether. Or, you may simply have debris in the areators. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Just recently the pressure of our water in the house surges when we turn a faucet on, and the city water company verified that our pressure in the house when we open a faucet is higher than the pressure in the lines in the street, and after the water runs is at a normal pressure (meaning their...
Water handle turns wrong way, after I installed new water valve
I just had a new bathroom faucet installed about a week ago. Today when I turned on the hot water side, I had full pressure, then pressure went low and has stayed that way. The cold side is fine. Did something break or could it be installed wrong? Thanks.
After the installation of a new hot water tank, we have less pressure which is only noticeable when trying to fill the tub. Any ideas? Thank you.
View more questions Search
|
