Ask Experts Questions for FREE Help !
Ask
    zuhair's Avatar
    zuhair Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 14, 2007, 11:46 AM
    High pressure valve needed
    Looking for a solenoid valve rated at 2000-3000 psi. can a paintball push valve do?
    I will be adding the soleniod?
    Please not too expensive valve!
    rdhanson's Avatar
    rdhanson Posts: 5, Reputation: 1
    New Member
     
    #2

    Jan 14, 2008, 02:48 PM
    Have you tried GlobalSpec – Engineering Search & Industrial Supplier Catalogs
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Jan 14, 2008, 03:06 PM
    That's not enough information needed to specify the valve, You want it for a 10' diameter water line, right?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c [ 1 Answers ]

Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading

High pressure at sink, low pressure at shower [ 2 Answers ]

Hello, My sink in the bathroom has good solid water pressure. Next in the circuit is the toilet, which also has good pressure at the angle valve. The shower, however has terrible pressure. I have removed the head, and the pressure out of the shower neck is no better. Shower neck exits the...

Ford 6.0 high pressure turbo boost bypass valve [ 1 Answers ]

I have an 05 f-250 that recently started (after being in storage for the winter) popping the bypass valve for excessive turbo boost the engine is stock and the problem is intermittent the ford dealer just put in the latest pcm that did not help . Can somebody out there help me?

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

Low water pressure in an area known for high pressure [ 3 Answers ]

Greetings, My wife and I are in the process of updating 1957 side by side split level. The previous owner (OK, my Mom as I bought the house I grew up in from her) said that when they moved in they had to install a pressure reducer into the line. I have searched high and low but, I can't see...


View more questions Search