Ask Experts Questions for FREE Help !
Ask
    Dee2's Avatar
    Dee2 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2007, 10:54 AM
    Teflon tape on threaded brass connections
    I noticed on shower faucets that threaded brass connections were not teflon taped.

    Should teflon tape be used on threaded brass connections ?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 13, 2007, 11:09 AM
    Quote Originally Posted by Dee2
    I noticed on shower faucets that threaded brass connections were not teflon taped.

    should teflon tape be used on threaded brass connections ?
    Yes
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Copper to cpvc threaded connections [ 2 Answers ]

Hi, Can I connect cpvc threaded pipe adapters directly to corresponding male or female threaded copper adapters, and, using suitable pipe dope, get good reliable joints? I know there are threaded copper-to-glue cpvc conversion connectors available, but I have on hand a number of copper and cpvc...

Teflon tape under a compression washer [ 7 Answers ]

I know that teflon tape is not to be used on compression fittings, i.e. on threads. However I have a connection that is being very difficult. I cannot stop the fitting from "weeping'. I have tried new angle stops with the same results. I tried wrapping the pipe with a single reveolution of...

New shower valve has threaded unions, old one has non-threaded soldered supply lines [ 2 Answers ]

I bought a new bath/shower two handle 8" spaced valve unit. It has threaded supply unions, but the supply lines are not threaded. What do I need to convert the lines? Can I install stop valve and flexible lines to the threaded valve body hot/cold connections?

Rolled teflon tape for leaky shut off valve [ 1 Answers ]

I was trying to replace a leaky shut off valve. I couldn't get compression ring off copper pipe w pliers so I put new valve on old ferrule & valve leaked more. Home Depot guy said his plumber father has tried placing a thin rope of teflon tape around both bevels of compression ring & put new...

Teflon tape or caulk/sealant? [ 2 Answers ]

I am replacing the broken top section of a threaded Jones Stephens shower drain. The old section had plumbers putty used as a thread sealant on the PVC threads. The putty manufacturer says not to use it on plastic. Should I use teflon tape or a caulk/sealant (DAP KwidSeal for showers)?

View more questions Search