Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
New light fixture
 [ 1 Answers ]
 Changing light fixture in an older home with two conductor wiring. So, black to black, and white to white, but what do I do with the braided bare copper wire on the new fixture? Thanks for any help. 
Changed from fan to light fixture and now light will not shut off
 [ 1 Answers ]
 Today I tried to replace a ceiling fan to a light fixture. I connected the black to black white to white and copper to ground. I have a red wire that I don't know what goes to. The light now will not turn off. Should the red wire be connected to something? 
Light Switch and Fixture
 [ 1 Answers ]
 Bought a 72 Mobile Home. Want to install new hall light. From box comes B & W(B) light Switch wires. Main Feed w/ B & W & Ground. than 2nd set B, W & Ground. The circuit breaker for this powers the following Kitch & LR & BR light as well as the Hall light & switch. Im think that the... 
Waterproof light fixture
 [ 1 Answers ]
 I built "wet bathroom" that has tile floor/walls/ceiling. This room can be used as a spare shower. I need to find a waterproof or enclosed light fixture for over the sink. I have not been able to find one that will work yet. Any ideas? Thanks, Brian123:) 
Replace light fixture
 [ 2 Answers ]
 
I am replacing a light fixture and am confused at all the wiring here. I have two red wires connected to ea other and two black wires connected to ea other. Besides that I have two white wires that were used to connect my old fixture which had two clear plastic covered copper wires. My new light... View more questions Search 
  |