Ask Experts Questions for FREE Help !
Ask
    jrock29's Avatar
    jrock29 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 12, 2007, 04:25 PM
    Frigidaire bake element not working
    My Frigidaire bake element is not working. Once I unscrew the screws holding the element in place how do I detach it from the eletrical wires?
    simoneaugie's Avatar
    simoneaugie Posts: 2,490, Reputation: 438
    Ultra Member
    		  
    #2

    Dec 13, 2007, 01:33 AM
    I've replaced two. They both plugged in. unscrew it, if there are wires to deal with, ask for help if the new unit does not come with instructions. Please turn off power to the oven/stove before starting.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frigidaire range bake and broil element [ 20 Answers ]

Hello, We have a Frigidaire slide-in ceramic smooth top range. It is a Canadian model CPES389CA1. Seemingly no parts manufacturer on the Internet knows about this model. The range is five years old and it had less than normal use. Now there is no heat from bake or broil element anymore....

Frigidaire Wall mount oven lower element not working [ 4 Answers ]

Good Day. I have a 8 or 9 year old Frigidaire wall mounted oven, Model CFEB789CCB-1 in my house up here in Vancouver Canada. I recently heard crackling sounds that seemed to be coming from behind the LED control panels. It was not the sounds of relays clicking on and off. It was a bad crackling...

Bake element in GE Oven Model # ZET857BB2BB [ 1 Answers ]

The bake element in the top oven of my double convection oven has ceased to work. The broil element and everything else is working fine. How do I access the bake element which, apparently, is under the floor of the oven?

Bosch Oven - Convection Bake Stopped Working [ 1 Answers ]

I have a Bosch single built in oven model number HBL45 with convection. Recently the Convection Bake function stopped working. The fan runs but there is no heat. From reading the manual it sounds like Convection Bake uses its own heating element in the back near the fan, so I'm guessing there is...

Electric wall oven bake element wire [ 5 Answers ]

Hello Thinking I was on a roll after rewiring my ceiling fan I decided to replace the bake element on my kenmore electric wall oven that died the other night-how hard could it be to do? I turned off the breaker-unscrewed the element and gently pulled it out. One side had the wire attached-one did...

View more questions Search