Ask Experts Questions for FREE Help !
Ask
    kapearce's Avatar
    kapearce Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2007, 09:38 PM
    NOMA Thermostat
    I just installed a NOMA 7-Day programmable thermostat, and I have a question. When I first installed the thermostat, it stated the humidity in my house at 18%. I need it to be around 35-40% so I increased the setting. It is now a full day later, and the only reading that I can get for humidity states "L0%". What does this mean? The icon shows that the humidifier is activated, but I am wondering what the "L0% is referring to. Is it working? Why does it not give a % value?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 6, 2007, 09:04 AM
    The first question is do you have a add on humidifier? Next question when was the last time you serviced it?
    kapearce's Avatar
    kapearce Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 6, 2007, 09:14 PM
    Quote Originally Posted by hvac1000
    The first question is do you have a add on humidifier? Next question when was the last time you serviced it?
    The humidifier I have is attached to my furnace. It is a flow-through bypass humidifier that has been added to a bryant furnace.

    This is a brand new house that I built myself but did not like the humidifier and thermostat that my heating contractor supplied. This should not require any service at this time.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Dec 6, 2007, 09:45 PM
    I would check the batteries in the unit. If it is a new thermostat it does not make a difference because the batteries that come with them new are defective or out of juice right out of the box.

    If you replace the batteries and you see this sign within a week or two the thermostat could be defective.

    I would also refer to your original install instructions you saved after you installed the thermostat. I am sure this sign/signal is also listed there.
    kapearce's Avatar
    kapearce Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Dec 7, 2007, 08:40 AM
    That is the problem. I have gone through the operating manual and installation instructions several times and there is no reference to the "L0%" indication on the humidity level. When I first plugged it in it showed 18%, but now it won't give me a value.

    I will call NOMA direct to see if anyone there can help.

    Thanks,
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma thermostat [ 2 Answers ]

Hi, I have a NOMA Programmable 7-Day Thermostat, but today it seems to have gone strange. I had it on the Cool and heat started coming out of the vents. I thought the air conditioning was broken, so I turned the thermostat off, but a little while later the vent came on with hot air again? How...

Noma Thermostat [ 2 Answers ]

I bought a programmable thermostat I misplaced my manual. The fan does not want to turn off and when the heat comes on I have a display that shows a sign of fire and one that shows a music note what does it mean

Noma thermostat [ 1 Answers ]

I just baught and it has a noma programmable thermostat but I have no idea on how to program it at all if there is a manual on how to program or someone who can tell me how to program that would be great

Noma Thermostat [ 1 Answers ]

I have installed two Noma non-programmable thermostats in my bedroom. On controls the heat and the other controls the AC. My question is, why are the displayed temperatures different on each thermostat? They are literally 2 inches apart and the indicated temp on one is 1.2 degrees higher than on...

View more questions Search