Ask Experts Questions for FREE Help !
Ask
    Marcelvb's Avatar
    Marcelvb Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2005, 11:48 AM
    problems installin windows on PC
    Hello,

    I'm completely new on this forum but hope to find some help here. I have a fairly old PC, i.e. P3, 600MHZ on which I want to install a windows operating system i.e. Windows XP, or W98. The PC is mainly for internet nothing else.

    I have started completely from scratch, i.e. formatted the C-drive, repartioned the disk, followed the windows installation procedures for Windows98 for PC's without operating systems etc etc.

    Every singel time I start an installation no matter which system and also through various different CD rom's (I have tried 2 x W98, 2 x Windows XP various versions) the PC stalls after some time (ie for XP after 30 miuntes or so) and I need to abort the installation unsuccessfully.

    I have also run CHCKDSK, SCANDSK etc with no irragularities noted.

    Is this a hardware problem??

    Many thanks, marcel
    SESaskDFC's Avatar
    SESaskDFC Posts: 214, Reputation: 17
    Full Member
    		  
    #2

    Dec 7, 2005, 08:58 PM
    Howdy and welcome to AskMe HelpDesk:

    90% of all install problems can be traced back to ram problems..

    Suggest you get a program called memtest86.. install it on a floppy and use that to boot your system.. Let it run for a couple of hours (the more passes it makes the better) and see what turns up..

    If you have multiple sticks of ram, run the program on them one at a time and then altogether..

    One more thing you could try is removing everythin other than your video card, hard-drive and ram (modem, nic, soundcard, etc) and try the install like that..

    Murray
    Marcelvb's Avatar
    Marcelvb Posts: 9, Reputation: 1
    New Member
    		  
    #3

    Dec 8, 2005, 07:01 AM
    Apologies I'm a little bit of a PC nerd to these sort of things but what do you mean with:

    If you have multiple sticks of ram, run the program on them one at a time and then altogether

    And where can I find "memtest86"

    Tx, MArcel
    SESaskDFC's Avatar
    SESaskDFC Posts: 214, Reputation: 17
    Full Member
    		  
    #4

    Dec 8, 2005, 08:32 AM
    Memtest86

    You will need to open your computer up and find the ram.. If there is more than one ram module, then remove all but one.. Run memtest86 on it..

    Replace that stick with another and run memtest again.. Keep going until all ram has been tested..

    Murray
    LTheobald's Avatar
    LTheobald Posts: 1,051, Reputation: 127
    Ultra Member
    		  
    #5

    Dec 8, 2005, 08:38 AM
    Just want to add only open a PC if you know what you are confident with what you are doing. Just "diving in" can harm both you and your PC ending in expensive repair (or hospital) bills. If memtest comes back with bad results, it might be worth taking it to a tech guy who knows exactly what they are doing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HELP! Windows xp home network setup problems [ 2 Answers ]

When I run the network setup wizard it freezes at the part where it configures the computer - it won't complete the setup and I don't know how to make it!! HELP!! :confused:

Windows Xp restart/more problems then what have been previously questioned. [ 4 Answers ]

I know this question has been asked already...but my situations alittle more complex....please read along!!! :confused: Okay I have an Hp, running on Windows XP..The computer is basically new, never used for anything other than wordpad. Just recently connected it to a cable modem. Was running...

Windows XP and Other Problems [ 5 Answers ]

Ok, I downloaded windows xp on my desktop computer a while ago without a problem. I recently purchased a laptop. I tried to download windows xp onto it and I kept getting the error message that the authenticity code that I put in wasn't valid, which makes no sense to me. :confused: What can I do?...

USB flash drive problems in windows XP [ 4 Answers ]

Hii, Whenever I plugin any kind of usb flash drive to my gateway profile 5 machines running windows xp(sp2) the computer reboots automatically before detecting the drive. I think this problem started after installing sp2 in my machine. This problem is really frustating. Any kind of help or...

Windows ME... Problems!? [ 6 Answers ]

:) Hi... I have Windows ME on a Intel Pentiem Celeron 600GH which Ive had for 4 years (quite ancient now I know!) A few days ago I noticed it wouldn't open the MY DOCUMENTS folder I had to keep restarting the computer... I have now also come across WORD won't open or it takes ages to open,...

View more questions Search