Ask Experts Questions for FREE Help !
Ask
    ericbernie's Avatar
    ericbernie Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2007, 06:50 PM
    No flame
    My Trane XE furnace blows cold air. The indicator light blinks 4 times,pause then 4 again.
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #2

    Nov 29, 2007, 06:59 PM
    Look on the furnace door for this code, look for 44 or 4 .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Flame comes on but goes off [ 2 Answers ]

I have a goodman furance modal gmt115-5b. The flame at heat bar come on only for a few seconds then goes right off.

No flame [ 3 Answers ]

I recently bought a home that's approximately 12 years old. The gas heater seems to be working fine, but no flame. I can smell gas, but it never shuts off unless I turn it off. A few months ago I had a similar problem where the sensor needed to be cleaned. The problem then was produce a...

Flame out [ 1 Answers ]

I have a Evcon Natural Gas Furnace. The unit comes on, the combustion chamber fan comes on , the igniter glows orange, the flame ignites and main fan comes on but flame goes out.

No flame [ 1 Answers ]

My pilot won't ignite, and I get 3 flashes from the indicator light, stating either my pressure switch is jammed or vent is blocked, how do I know which is the problem, and is this something I can repair or do I need a specialist? [email protected]

Flame on! [ 4 Answers ]

Please HELP. I'm having a problem with my furnace rather it's my thermostat it's no responding to the temperature. I replcae it with a new one and it's still the same the second I turn power on the flame and fan blower turns on.What could it be. The wring it's only two wires. W and r.

View more questions Search