Ask Experts Questions for FREE Help !
Ask
    kbtl4's Avatar
    kbtl4 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 28, 2007, 01:49 PM
    Bryant 373LAV060090
    The inducer blower comes on, both ignitors glow, but I never hear the gas valve open... any suggestions.. thanks in advance (could this be as simple as a bad valve?)
    juggallojed's Avatar
    juggallojed Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Nov 28, 2007, 05:24 PM
    Check the roll out switches and the draft safety, follow the wires from the gas control,

    Also check that the gas is on .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Furnace problems [ 14 Answers ]

Hello everyone, I have a Bryant 80v furnace. Everything works fine till it is time for the blower fan to come on. I have opened it up, and the fan wheel turns freely. Checked the fuse on the circuit board no problems there. I been doing some reading about it all day long. The furance lights and...

Bryant furnace does not come on [ 3 Answers ]

We have central AC/Heating with separate Bryant heating and AC units that are controlled from the same thermostat in the house. When I turn the Heat ON and set Temp to way higher than current Temp, the light on the thermostat comes on but the heating unit does not go on... no sound of burners...

Carrier vs Bryant [ 2 Answers ]

I have two quotes from two reputable installers. One quotes Bryant and the other Carrier. Both units are the second from the top level of the lines for scroll compressors and Puron. (Bryand Model 165a 5 ton versus Carrier Performance Series 5 Ton) The Bryant is being quoted a bit cheaper than the...

Bryant Blower Motor [ 3 Answers ]

I have a Bryant furnace that is 13 yrs. Old. I would like to take the blower motor out and replace it with a new model. Is there a correct way to remove the blower without tearing the whole furnace apart?

Bryant Burner [ 3 Answers ]

I have a valve on a Bryant Burner for an old gas furnace. There seems to be a problem with the gas valve that feeds the burner. Are 40 year old valves available? Thank you. Dennis

View more questions Search