Ask Experts Questions for FREE Help !
Ask
    WJGreer's Avatar
    WJGreer Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 26, 2007, 01:24 PM
    Cartridge Replacement caused Banging Pipes!
    Hello,

    I recently replaced a leaky cartridge in one of my showers. It has a Moen single handle shower faucet, and I used an OEM replacement. The leak was solved, and the shower worked perfectly for about two weeks. Now, suddenly, the pipes bang whenever I turn on that shower. I can turn it on a little (about 45 degrees of a full circle), but beyond that the banging begins and the pressure drops substantially. All of the other faucets in the house work normally.

    From what I know about the operation of the faucet, I suspect that the cold water is coming through properly and it's the hot water causing the problem.

    Most of the internet searching I have done has led to water hammer, but I do not think that is my problem as it seems to occur upon shutting off the water flow, whereas my issue happens only while the water is actually running.

    Any thoughts?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 26, 2007, 01:28 PM
    You should go back and reinstall the cartridge. I believe it is not properly inserted into the mixer body. Just double check your work.
    WJGreer's Avatar
    WJGreer Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 26, 2007, 01:32 PM
    Quote Originally Posted by ballengerb1
    You should gp back and reinstall the cartridge. I believe it is not properly inserted into the mixer body. Just double check your work.
    I will try that - thanks.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Banging Pipes [ 4 Answers ]

Hi, We purchased a house a little over a month ago. The house was built in 1999. It is a 2 story house and in the bathroom on the 2nd level, when you turn on the faucet in the sink either all the way to hot or all the way to cold (it is a one handled faucet), the pipes make a loud banging...

Banging Pipes [ 2 Answers ]

Why do the pipes make a loud banging sound every time the toilet is flused or hot water turned off from a faucet? :confused:

Banging pipes [ 1 Answers ]

In just one bathroom when the water is turned on the pipes bang when the water is running or when the toilet is flush

Banging pipes [ 1 Answers ]

I have read a lot about people with pipes that bang when they first turn them on, but I have a bit of a different problem. When I turn on either the cold or hot in the kitchen, there is no pressure at all. The water will come out in a small stream or not at all. I then will turn on and off the...

Banging pipes [ 9 Answers ]

Whenever I use a water service (tap/shower/toilet/etc) in my house, the pipes rattle and make banging sounds. Can someone explain why this is happening and how it can be corrected? Thanks!

View more questions Search