Ask Experts Questions for FREE Help !
Ask
    Rae_Cherrie's Avatar
    Rae_Cherrie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2007, 10:47 AM
    Low water pressure
    I want to replace my existing electric shower b ut we have low water pressure in this area, I was looking at using a booster pump plumbed into the hot and cold water supply when someone recommended a water pressure system or something, confusing to me can anyone help please, :)
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #2

    Nov 27, 2007, 10:24 PM
    Not familiar with this system, sorry
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Nov 28, 2007, 04:39 PM
    Is this a well or city water?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low hot water pressure through the whole house even ater replacing water heater [ 2 Answers ]

I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.

No water to both sinks / very low cold water pressure to bath and washer [ 1 Answers ]

My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...

Low water pressure oil hot water heating system [ 1 Answers ]

How does one go about increasing water pressure in a baseboard heating system?

Low Pressure and Low Flow Water Supply [ 4 Answers ]

I recently moved into a house that is about 6 years old. The house sits upon a small hill. The water pressure is 40 psi at the street and the flow rate is 13 gpm. At the house, the pressure is about 30 psi and the flow rate is 3.5 gpm. The house is higher than the street level, but the...

Low water pressure in an area known for high pressure [ 3 Answers ]

Greetings, My wife and I are in the process of updating 1957 side by side split level. The previous owner (OK, my Mom as I bought the house I grew up in from her) said that when they moved in they had to install a pressure reducer into the line. I have searched high and low but, I can't see...

View more questions Search