Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling
[ 3 Answers ]
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
5 speed ceiling fan wireing
[ 1 Answers ]
I have a old ceiling fan that is controlled from a wall switch. The switch has 5 settings. The transformer in the switch need to be replaced however I can't find one here in Phoenix. Can someone tell where I can get a transformer or tell how this switch and fan is wire so I can replace the fan with...
Trouble with ceiling fan on a dual fan/light dimmer switch
[ 1 Answers ]
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...
Hanging ceiling fan from vaulted ceiling peak
[ 2 Answers ]
Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this? View more questions Search
|