Ask Experts Questions for FREE Help !
Ask
    whittey's Avatar
    whittey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2007, 09:41 AM
    Kenmore elite dryer wiring
    I need a wiring diagram for my kenmore elite dryer 220 volt electrical plug that goes into the wall 3-prong.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Nov 23, 2007, 10:28 AM
    The lower prong should be ground, and the 2 angled blades hot and the other hot leg. If you are adapting a newer 4 prong dryer plug to it, better post to electrical to make sure you meet code.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore elite Dryer - [ 3 Answers ]

My kenmore dryer starts the drying cycle then after about 2 - 5 minutes shuts off. It will restart after about 30 minutes. I have checked the thermal cut offs hi limit thermostats, etc. Any suggestions?

Kenmore elite dryer [ 2 Answers ]

The dryer does not heat up. I replaced the heating element, it still does not heat up when turned on? Any clues to what it could be?

Kenmore Elite dryer [ 1 Answers ]

I have a Kenmore Elite dryer that is 7 yrs old. There is a panel on the front bottom of the dryer. When the dryer is opened to remove clothes there is a removable filter that slips into that bottom panel that must be cleaned after every use. The dryer is not drying well, which leads me to...

View more questions Search