Ask Experts Questions for FREE Help !
Ask
    dancer6's Avatar
    dancer6 Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 22, 2007, 04:13 PM
    Hot water driping out of Delta faucet
    I have a Delta Model #35925 two handle widespread lavatory faucet and the hot water faucet is dripping out of the spout not from the handle. I have put 4 new cardridges in and it still leaks. HELP
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Nov 22, 2007, 05:07 PM
    Your #RP47422 Srem Unit icartridge sn't seating. Shut the water off and remove the cartridge. Check the inlet ports and place a pan over the open valve body. Now turn on the hot water on for a minute to flush out the supply and valve body. Now button it back up and check. Let me know, Tom
    dancer6's Avatar
    dancer6 Posts: 3, Reputation: 1
    New Member
     
    #3

    Nov 22, 2007, 06:33 PM
    Quote Originally Posted by speedball1
    Your #RP47422 Srem Unit icartridge sn't seating. shut the water off and remove the cartridge. Check the inlet ports and place a pan over the open valve body. Now turn on the hot water on for a minute to flush out the supply and valve body. Now button it back up and check. Let me know, Tom
    I tried that but it didn't work either...
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Nov 22, 2007, 09:21 PM
    Check the number of the replacement cartridge against number in my post. Tom
    dancer6's Avatar
    dancer6 Posts: 3, Reputation: 1
    New Member
     
    #5

    Nov 23, 2007, 06:45 PM
    Quote Originally Posted by speedball1
    Check the number of the replacement cartridge against number in my post. Tom
    The number is the same as the one you gave me. I had Delta send these to me...
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #6

    Nov 24, 2007, 06:32 AM
    Well, something isn't allowing the cartridge to seat closed. If a replacement cartridge didn't work then the problem's in the valve body itself.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to replace 'O' rings and Gaskets in Delta Faucet [ 1 Answers ]

My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you

Minimal water flow from hot water side of faucet [ 2 Answers ]

Our kitchen sink as a very low water flow on the hot side of the faucet - what can we do?

No hot water from tub faucet; all others - very hot [ 2 Answers ]

Every hot water faucet in my house produces scalding hot water. EXCEPT the upstairs tub/shower. From that faucet we only get lukewarm water. Why? What should be replaced? bradsmithmm

Delta Pullout Faucet Water Pressure Loss [ 2 Answers ]

We have a Delta Signature Series Faucet Model 472, (Single Handle, Pull Out) in our kitchen sink and just yesterday started having low pressure. Haven't changed the water heater or anything else lately, the house is only about 2-1/2 years old. Pressure remains fine in all of the other sinks in the...

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...


View more questions Search