Ask Experts Questions for FREE Help !
Ask
    daddyftw's Avatar
    daddyftw Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2007, 03:02 PM
    In toilet installation new to ty into existing sewage line
    I want to convert my laudry room into a dual room I would like to add a shower sink and toilet.. the hot water and water connections are there for the washer... I do I ty into the existing pluming to install the toilet? The house is on concrete slab and the main bathroom is about 20 feet from the laudry room .
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 22, 2007, 04:43 PM
    You will have to break up the cement for most of the drainage. Tou may use the washer vent for your lavatory. Cut out the washer trap and standpipe and install a sanitary tee and stubout. The toilet will connect to the sewer main under the slab and the shower connect to the lavatory drain and be wet vented by it. The water you can pick up from the washer supplies. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to run pipes to existing sewer line [ 1 Answers ]

I am building a bathroom with two tolets from scracth and two sinks have no ideal where to start.:) :)

Using existing tub drain line in concrete slab [ 4 Answers ]

I am installing a new whirlpool tub in place of an existing conventional tub. The old sink drain terminates into a concrete slab. The new sink drain will be at least 2 feet from the old. What are my options? Is there anyway of tieing in the new drain into the old drain without taking up all the...

View more questions Search