Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have AC, but no heat... Is the problem my furnace?
[ 7 Answers ]
At first, my motor fan would cut off. After replacing the fuses, it kicked back on and I had cool AC. Later down the line, I noticed frost on the pip leading from the furnace to the motor fan. I purchased some insulating tape and called it a day. It seemed to keep it from freezing. Now, I tried...
Gas Furnace Heat
[ 1 Answers ]
The repair tech says my Lennox Pulse gas furnace is fine and that the thermostat is fine also. However, even when it says it is 75 in my house, I am still cold. When it is 75 at work, I'm "toasty". The technician did say replacing the "U" coil may help (he didn't look at it yet), but it is...
Heat/furnace won't cycle
[ 1 Answers ]
Hi, I have a Central A/C & Heat Unit on my roof, it is about 18 years old. The A/C works fine. I have a prof replace the ignitor last year and it gets a little better. However, I noticed that the heat still have problem whenever it started continually running for more than 20 or 30 minutes, then...
Furnace has no heat
[ 3 Answers ]
Please help My furnace is not working and I know very little about it.. I was told it does not have pilot but has an ignitor... I turned it on yesterday but it didn't come on.. There is a glass mirror on the door that has a red light in it.. The red light brinks rapidly so I know it has power... View more questions Search
|