Ask Experts Questions for FREE Help !
Ask
    Jewels1242's Avatar
    Jewels1242 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 15, 2007, 07:42 PM
    Model 64982300 dryer heater element for Kenmore Elite
    I'd like to get the dryer heater element out carefully; can someone give me some advice or link me to a schematics?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Nov 15, 2007, 07:59 PM
    Www3.sears.com. You'll need a "." after the 3rd character.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore Elite Dryer Model #110.60936990 not getting hot [ 2 Answers ]

I have a Kenmore Elite Dryer Model #110.60936990 and it is not heating up. When you press the start button and let go the dryer will start but then it stops right then, but if you hold the start button it will continue to run until you let the button go and it will not get hot while holding the...

Kenmore Elite Dryer Model 110.60942990 [ 3 Answers ]

My Kenmore Elite Dryer Model 110.60942990 will not heat up. I cannot get the back off to check the element. Please help!

Kenmore Elite Dryer Model 110.63932102 will not heat [ 6 Answers ]

My dryer stopped heating although it runs. I confirmed I was getting 240volts at the source. I checked the continuity of the element, the thermal fuse and the thermostat and found that they were continuous. I have read that the thermistor might have something to do with it...

Heating Element Kenmore Elite Electric Dryer [ 3 Answers ]

How do I remove the heating element from the dryer for replacement? I can get to it and there seems to be one or two screws to loosen, but I can't disconnect the electrical connections to the heating element itself.


View more questions Search