Ask Experts Questions for FREE Help !
Ask
    desgrunner's Avatar
    desgrunner Posts: 19, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2007, 04:50 PM
    Challenger SB20 Disconnect Panel Replacement?
    Hello all... I am new on this message board. I have a hopefully simple question. I need to replace the buss bar unit in my Challenger SB20 (200 amp) home disconnect panel. I have searched for individual parts, complete panels and have found nothing. Is this company STILL in business? Does anyone know where I can get parts/complete? I really hate to think about changing out to a new different brand panel... Any HELP? Email me please! Thanks Doug in Ohio:confused:
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 12, 2007, 06:58 PM
    Challenger has gone away, some new and replacement breakers are still available .

    Try doing a search for Challenger panelboards, there are some surplus companies than may have what your looking for.

    I am afraid you may need to replace the panel.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

100Amp disconnect panel before 100Amp main pannel [ 5 Answers ]

I would like to relocate my main 100Amp panel to the inside wall of my garage. Code saids the main panel must be on an outside wall. What I was thinking of doing Is install a New Main panel on the inside wall of the garage and put a 100Amp disconnect at the old panel location. I am aware of...

Breaker size in main panel to support sub panel? [ 7 Answers ]

Hello, I am wiring a sub-panel to the outside of my home (50 feet from main 200 amp box). I ran 3 wire - 6 gauge. What is the largest 2 pole breaker I can put in the main panel to supply the sub-panel. TYPE NM-B 6-3 WITH GROUND 600 VOLTS CIRTEX-I EZ-STRIP (R) PLUS 17:11 2/5/07 SB/RC ...

200 AMP Service panel to 200Amp Sub Panel [ 1 Answers ]

I getting new 200Amp service to surface mount service panel. I want to run 2oo cable to bring it sub panel in my Garage which is approx 120Ft Run through ceiling. 2 Questions 1. Is there any ristriction on running a 200AMP inside house to garage ? 2. I got a dirt cheap subpanel that has...

Main Circuit Panel to Branch Panel? [ 1 Answers ]

Hello experts, OK... My Main Load center in my home has a branch circuit connected to a 60 amp breaker. The branch feed wire is a 4awg copper wire. The branch panel is downstairs and it has a 100amp main cutoff breaker installed in it. It feeds the whole downstairs including... (1)...

Kenmore Elite Dryer Toe panel - how to get panel OFF! [ 3 Answers ]

I have a Kenmore Elite Model # 110.600094990 27 inch Electric Dryer - NOW How the heck does one take the Toe Panel Off / or Open this lower section of the dryer? There are two lower edge clips and two upper edge retainers. I CAN NOT get the panel to budge! This is a 7 yr old unit. Thx DAS

View more questions Search