Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a furnace thermostat to manually operate the furnace fan
[ 2 Answers ]
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
Thermostat clicks on and clicks off fast
[ 2 Answers ]
The maple chase thermostat clicks on sometimes for one second and sometimes a couple of minutes and never stays on long enough to cool down the house just started happening and its really hot.
Furnace clicks but will not shut off
[ 1 Answers ]
Hello I have a Coleman Evcon Heating and Air Conditioning product which is a Oil Burner heating furnace. For a few days the furnace would work then it would click like it was time to shut off but it wouldn't shut off it would click for a few more times and then it would just shut off completely...
Furnace thermostat
[ 1 Answers ]
Our heater is working because the house is not too cold. We cannot adjust the thermostat manually. The red light goes on but we can't move the temperature higher or lower. We had a power surge a few days ago and since then we have had a problem. A repairperson is coming today. I would like to... View more questions Search
|