Ask Experts Questions for FREE Help !
Ask
    ster0614's Avatar
    ster0614 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 11, 2007, 09:39 AM
    Kenmore HE4t dryer won't start
    I have heard the damp dry button is stuck. This happened a week ago and pushing on the buttons did start it. It is doing it again and the button pushing is not working.
    Any other suggestions?
    MikeyFridge's Avatar
    MikeyFridge Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Sep 1, 2008, 06:09 AM
    I'm sure you've solved this by now, but another thing to check is the door switch. This dryer door is a lousy design, and now and then won't close properly. If the dryer thinks the door is open, it won't start.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore he4 panel won't work and dryer won't start [ 1 Answers ]

I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...

Kenmore dryer won't start, light does come on [ 2 Answers ]

My kenmore dryer model 110 series 67834794 won't start when I push the start button. The light comes on when you open the door, so I am thinking I must be getting power. I bought an electrical tester and tested the start button and it shows it is getting power. All the web sights I have looked at...

Kenmore dryer won't heat [ 1 Answers ]

I have a Kenmore dryer that will not heat, however on the timed dryer cycle the timer advances to 0 but it will not shut off model 110.66514794 Thanks

View more questions Search