Ask Experts Questions for FREE Help !
Ask
    cerdory's Avatar
    cerdory Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 11, 2007, 09:16 AM
    Gas Furnace
    My York Gas Furnace starts only when manually switching the electrical control switch. The thermostat is new, but the furnace seems not to respond to its temperature control, what is the problem and how do I solve it?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 11, 2007, 09:40 AM
    I would bet it is a pinched or defective low voltage wire from the furnace to the thermostat or the new thermostat is wired incorrectly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace [ 1 Answers ]

Before you start a hot water gas furnace you have to bleed the water out of the pipes, how do you do it right? My heat is usually very uneven.

Gas furnace [ 1 Answers ]

I have a trane gas furnace 11 years old.when the thermostat calls for heat the ignitor will glow but the gas valve opens sometimes and will not open other times.I can turn the thermostat off and on and it will come on sometimes.what is wrong?

Gas furnace [ 2 Answers ]

On startup , a natural gas furnace gas heating system has cold air blowing out the registers why?

Gas furnace [ 2 Answers ]

A code comes up on my new installed gas furnace," incorrect line voltage phasing" Can anyone tell me what this means. Thank You.

Gas Furnace vs. Oil Furnace [ 2 Answers ]

I have an oil furnace with CAC that needs to be replaced in a 30 year old house. Keep the Oil system or replace with Gas? What Brands for each?

View more questions Search