Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Running in wall Coaxial Cable from Existing wall
[ 7 Answers ]
Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my...
Forgot to label the wires before taking out curent thermostat
[ 1 Answers ]
My current White Rodgers thermostat stopped working.I bought new Honeywell RTH6300B thermostat but forgot to label the current wire connection. Can anyone guide me now on choosing which color wire should be connected to which thermostat terminals. I have 4 wires available to be connected to...
Wiring wall mounted thermostat-operating two baseboard heaters
[ 7 Answers ]
I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I will be using one 240 V 2 wire circuit running two heaters at a total of 3800 watts. I would like to have both heaters controlled by one wall mounted double pole thermostat. How do I run the...
Taking tape off the wall
[ 1 Answers ]
I was trying to place a mirror on the wall of my hallway with some sort of special tape use for that kind of mirror. So it happens that the mirror fell and some of the tape is stuck on the wall. I just bought this place and I don't want to ruin the paint. How can I take that tape off without...
Thermostat for wall furnace?
[ 1 Answers ]
I have a ten year old (propane) gravity wall furnace that came with it's own wall mounted thermostat, which is a Honeywell "Millivolt". I am now relocating the thermostat, because of a small remodeling, and want to replace the thermostat with a more up to date (looking) thermostat. Can I just go... View more questions Search
|