 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
94 civic si coupe vtech head gasket information
I have been to mechanics who have told me my head gasket is blown on my 94 civic si coupe which has a vtech engine. I want information step by step to doing this project myself. Changing the gasket, removing the head, smoothing the head surface down with what type of material, what needs lubrication, what needs to come off at what time in the process.
|
||||
|
||||
|
This is for a D Series motor. It helped me with my head gasket on a 95 Civic with a 1.5 non V tech, but the pics are of a V tech. The whole site is pretty helpful.
How To: Change a Head Gasket. -LOTS of pics- - HondaSwap Forums Between that site and this one, I got my project done. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can anyone give me a step by step process for changing the head gasket on a 94 honda civic dx. I want to do it on my own!
I'm blowing oil and water out of the exhaust. Would the head gasket be the most likely cause? Would there be any other issue that could cause this symptom? What other gaskets would be most recommended to change while the head is out of the car? Is it necessary to drain the engine oil to...
I just installed a new distributor I thought I lined up everything right... it starts runs but when I press on the gas it doesn't have any power any ideas?
I have a 1991 Honda Civic DX. It has run well until last week when it just wouldn't start for me. I have checked a few things: I have spark on all four plugs, the fuel pump seems to be working as it should, the starter is turning the motor over... although it doesn't sound right. I checked...
View more questions Search
|
