Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
GFA Heat; Poor Heating in Apt - Heat is Trapped Near the Ceiling
[ 6 Answers ]
In a nutshell: The warm-air registers in my apt are at the very top of the ten foot high walls. Hot air does not circulate properly to heat my 1-bedroom apartment. Details: Based on what I know about the basics of energy, heat rises. And I can't for the life of me understand who thought...
Installing a signal wire for a heat pump change over valve
[ 2 Answers ]
My wife and I just bought a house and I was thrilled when I saw that the outside unit was a heat pump (a Goodman ck36-1b model, to be exact). Well, today was the first day that we were to run the heat, and I noticed that the furnace kicked on immediately. "Strange," I thought, "doesn't the...
Electric heat pump auxilery heat problem
[ 4 Answers ]
Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not.... View more questions Search
|