Ask Experts Questions for FREE Help !
Ask
    mmgood's Avatar
    mmgood Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 6, 2007, 08:28 AM
    Thermostat melfunction
    Hi all,
    Just purchased a nome programmable thermostat and everything works , hooked it up the proper heating but the problem I'm having is the small blower that comes on before my gas furnace ignites goes on and off all the time even after the temp has been reached and the gas shuts off.I' afraid of with all the on and off this will damage the little blower can anyone tell why this is happening , is it a faulty thermostat or something thing else.With my old mercury thermostat I have on there now it's not a problem it works fine . Pleas I would appreciate a fix or some kind of solution.


    Thanks:confused:
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
     
    #2

    Nov 6, 2007, 08:36 PM
    It's the thermostat take it back and get a new one its back fed voltage to the relay that powers the inducer motor

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Hooking up a new thermostat but old thermostat has a white and a black wire? [ 2 Answers ]

Everything I look at indicates a white and red wire for the connecting wires. Our thermostat is probably original to our home (1943). It has two wires. It is difficult to tell but it looks like one is a white wire and the other is black. I've tried looking on the internet for some info however...

Replace T87F thermostat with digital thermostat [ 1 Answers ]

My T87F has two wires Red and White. No code indicating how to connect to the new digital on.


View more questions Search