Ask Experts Questions for FREE Help !
Ask
    interven's Avatar
    interven Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2007, 12:06 PM
    Floor furnace
    I have a floor furnace that will come on but only stay on for about 3min. I have replaced the thermostat but no luck
    Please help it's getting cold.
    Thanks, Interven
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 6, 2007, 05:25 PM
    Sounds like the high limit control could be out of range,
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tile leak from 3rd floor through 2nd floor ceiling (bath) [ 5 Answers ]

Hi All: We renovated our third floor bathroom which included stripping the floor down and installing tiles (1" squares within 1' blocks). After our 3rd floor tenant takes long showers we get some leakage through her floor and thusly through our ceiling (which we now have partially open to have...

In floor furnace [ 1 Answers ]

I have a in floor furnace. I tried to light it yesterday and the polite lit but it would not kick in. I tried again today and I found that the matchless spark ignition has come off. Do I need that for the stove to work?:confused:

1st floor ceiling leak below 2nd floor shower [ 2 Answers ]

Our ceiling has developed a swelling or bubble in the ceiling and when touched-it literally fell apart and created a hole. It is dry to the touch but happens to be right in line with our 2nd floor master bedroom shower where the plumbing probably comes down. The shower has a plastic floor with a...

Toilet leak ,3rd floor to 2nd floor ceiling. [ 1 Answers ]

Was told that I would have to build a 6 inch platform to place toilet high enough to get adaquate flow to prevent this. Is this valid or does anyone else have a better plan. Floors,pipes , toilet all new install to existing. 3 years.

Proper underlayment for vinyl floor starting at floor joists [ 2 Answers ]

What is the proper way to build up a floor to prepare for vinyl flooring? I'm building a mud-room in the garage attached to the house, 5' by 13' . Presently I have the joists installed and am ready for subfloor. I am planning to use 3/4" T&G UDL plywood, glued to joists with construction...

View more questions Search