Ask Experts Questions for FREE Help !
Ask
    TopGadgy's Avatar
    TopGadgy Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 2, 2007, 10:00 AM
    Peugeot 106 Fault with indicator and lights
    Hi I'm hoping someone else has experienced and solved this problem,

    My L reg (1993) Pug 106 1.4XND blew a headlight last night and a couple minutes later that side of indicators started flashing quickly as if a bulb was out, which it isn't. Everything works fine without the headlights on but once they are the brake light on that side fails as does the rear indicator?!

    Can anyone explain??
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #2

    Nov 2, 2007, 12:05 PM
    I cannot find a schematic for your model, but it sounds like a faulty bround circuit.
    I've also seen a bulb not appear to be bad but one of the elements had broken and contacted the other element, shorting it not to ground but feeding back through the other circuit.
    Try installing a redundant ground to see if that helps.
    TopGadgy's Avatar
    TopGadgy Posts: 2, Reputation: 1
    New Member
     
    #3

    Nov 3, 2007, 05:07 PM
    Solved the problem - turns out it was a fault with the connection to the rear cluster, by simply disconnecting the plug on the inside of the boot and reconnecting it

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Peugeot 106 diesel 1997 [ 8 Answers ]

Hi my relay to indicators keeps making clicking noise tried changing it but still clicks does anyone know how to stop this please if I remove relay I have no indicators .:confused:

Peugeot 106 [ 1 Answers ]

Where can I find the colour code for my 1998 peugeot 106, I've looked all over the place for it but to no avail, any ideas??

Indicator lights on Hotpoint Range [ 1 Answers ]

Hi, We picked up a used Hotpoint range the other day. After plugging it in we tested the oven and the burners. Everything seems to be working fine except for the indicator lights. When the oven dial is set to OFF, the oven indicator light turns on. When the dial is set to anything else (BAKE,...

Problem with Peugeot 106 [ 12 Answers ]

I have been having trouble with my car. It has been over revving, it does not idle properly and it has caused the car to Kangeroo on occasion and generally had no umph. I also cannot start the car straight off, I have to rev it in order to get the engine going. I put it into a garage yesterday...


View more questions Search