 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Frigidaire dryer ignitor replaced, still won't burn.
Thanks to Hixton, I got my Frigidaire dryer apart and replaced the ceramic ignitor. Now it glows brite about 5 seconds everyminute. I can hear a click as it's turned off and on. But still no ignition. Also, and this is new, I can hear a sound just before the ignitor turns on like water and air being forced through a tube. It starts just before the ignitor glows and stops when it turns off. Just a thought, is it possible I broke the gas shut off valve and now it's closed even though it indicates open?
|
||||
Check out some similar questions!
Frigidaire dryer
[ 2 Answers ]
How do I replace the thermal limiter. I have taken the screws out of the clips, but can't get to the part. The top won't come lose.
Frigidaire dryer
[ 1 Answers ]
Dryer tears holes and get stuck in side of dryer.What part do I need to fix it,and how do I fix it
Furnace ignitor needs to be replaced and an additional valve?
[ 1 Answers ]
Our furnace started blowing out only cold air and the fan seems to run even if the thermostat is off, we tried replacing the thermostat and that was not the problem. It is a tech-4 gas furnace True blue 90. We were told it was the ignitor and that our model would also need to have an additional...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
