Ask Experts Questions for FREE Help !
Ask
    merckt's Avatar
    merckt Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 29, 2007, 05:14 PM
    Breaker amperage
    What amp breakers are typiclly used in residential for dryer , washer, dishwasher, glass cooktop, separate oven, 4 ton package unit, bath gfi, etc?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Oct 30, 2007, 02:32 AM
    Typically:

    Dryer -2 pole 30 amp
    Washer - 1 pole 20
    Dishwasher - 1 pole 20
    Glass cooktop - 2 pole 30
    Oven - 2 pole 30
    4 ton package unit- 2 pole 30
    Bath gfi - 1 pole 20
    Etc?- Anyone's guess

    And I stress "typically".

    Do not just go out and buy these breakers because I say so.

    Each appliance needs to be evaluated for load in amps or wattage, each has it's own derating of circuit size, usually 125% of nameplate load, to size the branch circuit wire and breaker size.

    What caused you to ask this question?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Amperage for 20 amp breaker [ 4 Answers ]

I have 30 women with sewing machines in the same room. They all are using basically the same amps... 12 amps. How many breakers do I need and of what ratings?

Amperage meter [ 5 Answers ]

I have older amperage meter form Micronta, I am thinking 1960's. I don't know how exactly to use it. It comes with the two needle probes and looks like the dial settings are like those on more modern versions, I am not electrically inclined and don't know the settings for testing live voltages or...

Electrical outlet rating vs. Circuit breaker amperage rating [ 5 Answers ]

Hello to all, I am new to this forum, please excuse me if this question has been answered. I just bought a Thermal Dynamics Plasma cutter. It has a Nema 50-P plug end on it, which I assume is to be plugged into a Nema 50-R outlet. In looking in my reference book, this is a 3 wire...

Replacing a circuit breaker with a GFI breaker- q on neutrals [ 1 Answers ]

In process on installing withquestion on neutral wires. Do you take the neutrals out of the in the main panel neutral and put them in into the breaker where its labelled "load neutral terminal" and only have the neutral "pig tail" to the panel neutral bar? Thanks!

Circuit amperage [ 2 Answers ]

If I have a 15 amp circuit does that mean I can only run one 15 amp rate device on that circuit? Or can I run any number of 15 amp or even higher amp devices, with wattage being the criterion for not overloading the circuit?


View more questions Search