 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Power and energy transfer
:eek: A loaded ore car has a mass of 950kg and rolls on rails with negligible friction. It starts from rest and is pulled up a mine shaft by a cable connected with a winch. The shaft is inclined at 30.0 degrees above the horizontal. The car accelerates uniformly to a speed of 2.20m/s in 12.0 seconds and then continues at constant speed. What power must the winch provide when the car is moving at a constant speed? What maximum power must the motor provide? What total energy transfers out of the motor by work by the time the car moves off the end of the track, which is a length of 1,250m?
|
||||
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Rowan and jean are tobogganing on an old pasture with rolling hills. At A the hill is 14m high; at B, 2.8m, at A, the toboggan is just beginning to slide. a)if there is no loss of mechanical energy, what is the velocity of the toboggan at B? b) if 25% of the mechanical energy at A is lost by B,...
After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...
Question: The net potential energy between two ions (e.g. Na+ andCl-) can be Represented as follows: EN =EA+ER = -A/r +B/rn (a) Calculate the bonding energy E0 in terms of the A, B, and n ...
Is there any difference between a Power Distribution Unit (PDU) and a Remote Power Panel (RPP) in context of data center? If yes, then what is it?. Thanks.
View more questions Search
|
