Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wago connectors
[ 4 Answers ]
Any thoughts out there on these push on type connectors?
Plenum EMT Bushings?
[ 3 Answers ]
I'm installing a wireless access point in a commercial environment on a drop ceiling. The space above the drop ceiling is plenum. The data jack for the access point is installed in an electrical box through a ceiling tile supported by a rod snapped onto the ceiling grid. I want to have the data...
Main Stack No Hub Connectors
[ 8 Answers ]
2 issues here... 1. The plumbing inspector told me that the 2 no hub connectors show here are not code. This is the main vent stack, 4" cast iron to 4" Schedule 40 PVC. What is an approved connector that complies with International Plumbing Code 2003? 2. The 2" cast iron vent pipe you can...
Romex connectors
[ 1 Answers ]
Going into the main breaker panel, can you put 2 romex wires through one romex connector (3/8") Also if allowed, can you run (1) 6/3 and (1) 8/3 romex wire through a 1" romex connector? Thanks all.
Crimp connectors
[ 1 Answers ]
What’s the proper way to install crimp connectors? Not butt splice connectors, I have used those many times. These connectors (made by GardnerBender) are plain metal and look like short pieces of tube. The instructions are confusing: insert wires, twist together then crimp. Are both wires... View more questions Search
|