Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a bathroon sink with a utility sink
[ 1 Answers ]
I want to replace my bathroom sink with a utility sink but the plumbing drain pipes are smaller than the utility sink fittings. Do I have to cut them off ,they seem to be glued on very tight.is there an adaptor I can use .I have no plumbing knowledge at all(as you can see)and little money to spend....
Basement utility sink-old house
[ 2 Answers ]
We have a 1945 colonial with a basement. It has an ancient utility sink and under the sink a pump of some sort that goes who knows where. The pump has a switch to turn it on and off with a timer (it is smell of smoke when turned on). When we first moved in the washer drained into the sink and...
Installing a Utility Sink in Basement
[ 3 Answers ]
I am trying to install a utility sink in the basement. My question is related to draining and venting said sink. I will attempt to describe my existing setup in order to narrow the response if possible. I am describing from the perspective of being in the basement and looking at the wall and...
Extending utility sink drain for bar sink
[ 2 Answers ]
I have a utility sink in my walk-out basement - that sink's 1.5 inch drain connection is approx. 18" above the floor, into a two inch horizontal run. This 2 inch horizontal PVC runs about 3 feet, then connects to a main 3" DWV. I would like to add a bar sink, set into a standard height (36")...
Installing Utility Sink in Basement Laundry
[ 3 Answers ]
I want to install a utility sink in my basement laundry. Can I hook the drain into the Stand Pipe for the washer? Or, do I have to hook it into one of the other main waste stacks that drop from the main floor above? View more questions Search
|