How do I change the heater fuse?

MRDWRICH Posts: 5, Reputation: 1

New Member

Oct 19, 2007, 04:36 PM

How do I change the heater fuse?

How do I take off the door to get to the lint trap screws?

MRDWRICH Posts: 5, Reputation: 1

New Member

Oct 19, 2007, 04:40 PM

110.64972301
I think

MRDWRICH Posts: 5, Reputation: 1

New Member

Oct 19, 2007, 04:46 PM

Yes

Add your answer here.

Check out some similar questions!

How do I change the heater fuse? [ 3 Answers ]

I am an ametuer repair person with a simple possibly stupid question, I cannot open the Kenmore Elite dryer to change the heater fuse :confused: How does one open the back of the unit to view the heater fuse?

Change Hot tub heater wiring [ 8 Answers ]

Gatsby spa is out of business, maybe for this reason. This is the wiring design I need to change it. By this diagram the heater is on whenever the thermostat says it is cold and 24 volts are supplied to the relays. Note the pump is not on. This design relies on the High limit switch to kill...

Keep blowing fuse [ 1 Answers ]

1998 Dodge Ram, been sitting for about a week, went to turn on windshield wipers and they didn't work. Check the fuse and it was blown. Changed fuse and as soon as I put it in the fuse blows. Did this several times and no luck. ANY IDEAS! THANKS,

Looking for a Fuse [ 1 Answers ]

Can't find this fuse anywhere. I've checked ACE Hardware, Radio Shack and several sites on the web. BUSS AGA 3A 125V This fuse is the standard 1/4'' dia and 9/16" long. Any help will be appreciated.

Thermal Fuse [ 3 Answers ]

I have a whirlpool le2500xtw1 dryer, I bought used.it worked fine for about a month, then one day it would run but not heat. First thing I did was get a new element. But the problem was the thermal fuse was blown. The replacement package had a new thermostat as well as the fuse. After a few days of...