Ask Experts Questions for FREE Help !
Ask
    watsusae's Avatar
    watsusae Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2007, 05:23 PM
    Black wires
    When you have a black and a white wire and you want to connect it a cord that has a smooth black wire and a ribbed black wire, which one connects to the white wire?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Oct 17, 2007, 05:54 PM
    Smooth to black (HOT) (brass screw)
    Ribbed to white (Neutral) (Tin screw)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3 wires + 2 wires  POOL MOTOR [ 2 Answers ]

I need help connecting a motor for my pool. The motor has 3 wires coming out of it. 1 white, 1 black, 1 black with a white stripe. A continuity test on the 2 blacks says they are wired together somewhere. I have a power cable coming out of the ground. 1 white + 1 black cables inside. ...

Thermostat Wires - Only 2 Wires (both black) [ 4 Answers ]

Hi there, I'm switching my thermostat for a newer digital one, though when I took out the old thermostat, there were only 2 black wires with white stripes on them. The new thermostat calls for an RH wire and a W wire, but I have no way of distinguishing the two apart. How can I tell which wire...

Blue, Black and White wires in celing fan [ 2 Answers ]

I removed a ceiling fan to replace a switch but did not note the wires. Now I want to replace the fan but find it has Blue, Black and White wires, whereas the wires coming from the ceiling are only White and Black. It also has a green wire attached to the casing. Does the blue and black wire...

Installing Ceiling Fan Wall Remote with Red & Black Wires? [ 13 Answers ]

I am trying to install a Hampton Bay Wall Remote Control that transmits a signal to a receiver that I will install behind the Ceiling Fan assembly. Problem: Remote instructions state to connect the 2 Black wires from the wall switch to the new Remote switch. The wall switch has a Red and a...

Hampton Bay remote wires do not match fan wires [ 1 Answers ]

Yesterday I installed a new Hunter ceiling fan. I also purchased a Hampton Bay wireless wall switch. Everything went well until I wired up the remote receiver. The receiver has a blue wire for the light that is supposed to connect to the blue wire (light) from the fan. The Hunter fan does not have...

View more questions Search