[candyishandy]

I would like to add a under slab circuit in my living room. I have tile over concrete and the nearest wall is 5 ft away. I want to pull #12 from a wall outlet under the slab to the center of the room for a floor receptacle. What would be the best method of pulling the wire without digging up the floor?

[tkrussell]

The only method is directional boring, and this is way too much for such a small run. This is the only trick to not digging.

A 100 foot run cost me $36,000.00, do the math.

Now if you can get to drive a large conduit under the floor from the outer perimeter, and drill a large hole at the outlet location, and can have the two meet, you just may get this done.