Ask Experts Questions for FREE Help !
Ask
    fredo55's Avatar
    fredo55 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 8, 2007, 04:11 PM
    How to wire thermostat to baseboard
    I've a baseboard with built in thermostat (not wall controlled) and I would like to wire a digital, non-prog, two wire, 240v honeywell RLV3100A to control that heather. Any hint appreciated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 8, 2007, 05:04 PM
    If it is a 240 volt thermostat you should have no problems except getting the wires from the baseboard to the thermostat. It showes you how to do it right here.

    http://customer.honeywell.com/techli.../69-1917EF.pdf
    fredo55's Avatar
    fredo55 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 11, 2007, 12:50 PM
    Quote Originally Posted by hvac1000
    If it is a 240 volt thermostat you should have no problems except getting the wires from the baseboard to the thermostat. It showes you how to do it right here.

    http://customer.honeywell.com/techli.../69-1917EF.pdf
    Thank you, that's what I needed, problem solved! :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

120 baseboard thermostat [ 1 Answers ]

Hi I am changing the thermostat for my baseboard heater (tried to go to program type but can't because there are none for 120 baseboard.. so I bought a simple one instead)... I have 120 volt and there are 2 wires from the wall... 1 red 1 white... there are 2 wires from the thermostat... 1 black and...

Baseboard Thermostat Woes! [ 1 Answers ]

I'm replacing my baseboard heater thermostat with a new Honeywell unit. This is the 3rd one! I have 2, 10 foot 240V baseboard heaters hooked up to a 30 amp breaker. For some reason, I keep burning out the thermos or what I recently discovered is the thermo is getting hot, thus preventing it from...

Wire new thermostat to new baseboard htr [ 1 Answers ]

I am installing a 220V Hydrosil baseboard heater. It came with no thermostat, so I bought one locally that is rated for 220V. I am not an electrician. I am using 12/3 wire as my power source and the htr uses only 8.6 amps so they say. I have a Red, Blk, Wht and Ground wire coming in. The heater...

5-wire thermostat - LOST a few wire labels. HELP! [ 2 Answers ]

I am installing a programmable thermostat (upgrading from a previous programmable that wasn't to our liking. When taking the old thermostat off, I noticed 4 of the 5 wires were labelled. That's a good thing. HOWEVER, when I took the old baseplate off, 2 of the labels fell off (not sure from...

Wiring a 2 wire thermostat to a 4 wire system [ 1 Answers ]

I have a gas furnace equipped with central air.The compressor is shot in the AC unit,and I needed to replace the thermostat so I bought a heating only thermostat.I have the blower and the w wires together on the w terminal designation and the rh on the r terminal designation, and I have the y wire...

View more questions Search