Ask Experts Questions for FREE Help !
Ask
    mharty's Avatar
    mharty Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 8, 2007, 11:28 AM
    Kenmore Elite Quietguard 7 #665.17263401 - Noisy
    Hi -
    I've had this dishwasher for just over 2 years, recently has become extremely loud. In fact, if I set the delayed start - it will wake me up in the middle of the night. The sound is a constant humming while in the wash cycle. Is there anything I can do, or does this require a service call? Thanks in advance for any advice.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Oct 8, 2007, 12:16 PM
    The new noise could be several things such as a bushing or bearing going bad or debris caught in the impeller. See if your strainer at the bottom of the sump area can be removed from the inside and check for debris. 2 years is a long time but I'd reread the warranty info to see if its out of warranty. Bushings and bearings usually last much longer than 2 years so I hoping you find debris.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #3

    Oct 8, 2007, 01:09 PM
    Must spread some around, ball, but you are right on the money

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I reset my kenmore elite 665 dishwasher? [ 26 Answers ]

I have a kenmore elite 665.16933 dishwasher. I think I need to reset it - I can only use the normal cycle and the other cycles (pots and pans, etc) won't kick on when pressed Anyone seen this before? Is there a way to reset the control panel?

Kenmore Elite dish washer modell 665 not draining [ 7 Answers ]

The dishwasher is not draining even after I pressed the drain button. Is there a way to look for blockage before I call someone. Thank you


View more questions Search