Ask Experts Questions for FREE Help !
Ask
    templelane's Avatar
    templelane Posts: 1,177, Reputation: 227
    Ultra Member
    		  
    #1

    Oct 8, 2007, 12:57 AM
    Swapping Chargers
    Is it all right to use a 19V, 3.16A charger in a laptop which uses a 19V 3.42A charger normally. Is it close enough?

    Thank you
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #2

    Oct 8, 2007, 01:36 AM
    Assuming that the connections are the same then go for it.
    I swap and change laptop charges regularly.
    templelane's Avatar
    templelane Posts: 1,177, Reputation: 227
    Ultra Member
    		  
    #3

    Oct 8, 2007, 02:47 AM
    Oh that's good to know. My charger has just died and it seems silly to buy a new one when we have so many knocking about the house as it is.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Swapping master cylinders [ 1 Answers ]

I just got a 1978 KZ650 and the front brakes are very soft. I am pretty sure the problem is the master cylinder. It looks like the guy who had it before me put a Honda master cylinder on it from a bike that had just one front caliper. Since this bike has dual calipers, the master cylinder is...

Swapping Shower and Toilet [ 2 Answers ]

I have a project I'm thinking about doing. I want to swap my shower and toilet. First of all is this possible. My house is on a concrete slab, and I don't want to move any drains. I just want to know, are the drains at about the same size to do this. My shower drain is in the center, and...

Wall socket plug in chargers [ 3 Answers ]

I just heard on the T. V. that I am "waisting " (using) energy if I don't unplug my plug-in charger for, e.g. cell phone, rechargeable flashlight, etc. How can that be if I don't have any of these appliances plugged into the charger, drawing current to the appliance?

RAID & Hot Swapping HDDs [ 2 Answers ]

Hello, After reading an article about RAID and hot swapping HDDs, I am considering that option and have a question. The article described a Promise system with a RAID controller card (0+1) and hotswap drive housings. If I decide to go this way I would have two of the drive housings in the...

View more questions Search