Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Motion detector installation?
[ 4 Answers ]
I am trying to install a motion detector in my house, but when I look at the siring diagram, I can' figure it out. The detector has three wires, 2 black and one green. I understand the green is the ground and one black is the hot and the other black is the neutral, but what I don't understand is...
Motion Detector Wiring
[ 1 Answers ]
I am a novice when it comes to electrical wiring. I purchased a IPP-15-LW leviton motion sensor switch to replace a current switch in my garage. The switch is one of two switches that are in the garage controlling the same group of lights (I think this is called a 3-way switch?) and it can be...
Smoke Detector Requirements
[ 7 Answers ]
When I put up my garage addition, the city inspector said that I had to put a smoke detector in each bedroom, in addition to the two I already had in the hallways. This I gladly did. My question is, how come the city code does not require smoke detectors in the garage(s). Vehicles can and do self...
Motion Detector Switches
[ 5 Answers ]
I have a light in my basement that is on a switch with another light. I would like to install a motion detector for the light. Can I do this even though it's not on a switch by itself? Most of the detectors I've seen are for a single circuit. Thanks.
The physics behind a smoke detector?
[ 3 Answers ]
I am doing a physics "how things work" project on a smoke detector, and I need to get in contact with an "expert" on them, who knows how they work, and the physics behind them. If someone could help me out. View more questions Search
|