Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Outlet for elec. Dryer
[ 3 Answers ]
I have a wire coming for circuit breaker for an electric dryer. It has 3- wires black, white and open wire. I want to connect them to an outlet. Which one is neutral and which ones are hot? Also if color codes are wrong, is the middle one the neutral and 2 on sides are hot? Thanks
Elec Dryer No Heat
[ 2 Answers ]
Just moved to the new house and the Kenmore Elec dryer won't heat up but does run... Ran before the move.. The old tent was drying cloths in theirs still before they got their dryer out.. It was the last thing they took.. Theirs worked fine so I'm really sure the outlet is good.. One other...
Kenmore 417 elec dryer low heat
[ 2 Answers ]
Hi, our kenmore 417 elec dryer only works on the high heat setting. I don't think it has full heat even at that setting. The vent is clean and open. Could it possibly be the thermal limiter? Thanks
Kenmore dryer: how long should heat cycle?
[ 1 Answers ]
Hello, This is my initial post to this forum and hope someone out there can help. I own a Kenmore dryer (87984800) that is about 12 years old. Recently, it has begun to take two cycles to dry a medium-large load of clothes. This is unusual for this dryer. The dryer is doing the following:...
Kenmore Elite Dryer Won't Heat on Timed Cycle
[ 1 Answers ]
I have a Kenmore Elite Dryer that is 4 years old. The dryer will not heat on the timed cycle, but it will heat on the Even Heat Cycle. The heating element will not com on when I have the timed cycle selected. On the Even Heat Cycle all of the temperature settings work. My dryer has a rotary... View more questions Search
|