Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a ceiling fan
[ 8 Answers ]
Changing a existing fan with 2 switches one for light and one for fan. Ceiling wires are black, red ,white ,ground. New fan has black,white,ground.not sure how to wire it up.:confused:
Wiring ceiling fan
[ 1 Answers ]
I am replacing a ceiling fan. It has 3 wires in ceiling, white, red and black. The fan I am relacing the old one with does not have pull chains. It has a remote box that mounts with the fan. There are only two wires that match to the ceiling side the white and the back What do I do with the...
Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling
[ 3 Answers ]
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
Ceiling Fan wiring
[ 1 Answers ]
Did I just mix up the white wires. After wiring and hanging my ceiling fan, I noticed when the switch is off, there is power to the light and fan and when the switch is on power is only to the light. There were 3 bundled black wires from the ceiling, two whites bundled, and one single white, as...
Ceiling Fan Wiring
[ 2 Answers ]
My new Hampton Bay Ceiling Fan w/lights says to connect the blue and black wires to the black wire and the white to the white. However, my ceiling junction box just has two white wires. I tried connecting the blue and black wires to one white wire and the white wire to the other white wire. The... View more questions Search
|