Ask Experts Questions for FREE Help !
Ask
    honda guy1966's Avatar
    honda guy1966 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 23, 2007, 12:06 PM
    89 civic fuel pump
    I am putting a after market fuel pump in my 89 civic,do I need to remove the old fuel pump and what is the fuel pressure in an 89 civic.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Sep 23, 2007, 01:17 PM
    Likely, 40-47 psi.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

'89 Honda Civic - no power to fuel pump [ 7 Answers ]

My little 89 Honda Civic had been running fine... then suddenly a few times it felt like the fuel delivery was getting weak, then it'd perk back up. I parked the car for a few days and drove my main car. I went back to the Honda after a 5-6 day hiatus - and it won't start. It turns over, but...

95 Honda Civic fuel pump test [ 1 Answers ]

:confused: My honda will not start, But will turn over fine. The check engine light flickers repeatedly. But the car will not start. I think it may be something to do with the fuel system. How do I trouble shoot this to find the problem? Can I, and how do I test the fuel pump, relays, and...

88 civic fuel pump [ 1 Answers ]

My 88 civic wasn't starting so I thought it was flooding. So I clamped off the fuel line with vice grips to stop the gas but it didn't help but left me with another problem. Now the fuel pump isn't pumping the gas to the throttle body. Did I damage the fuel pump by doing this or can I get it to...

Fuel Pump Pressure For Honda Civic 00 [ 1 Answers ]

I would like to know which is the desire fuel pump pressure for my honda civic 2000 according to the manufacturer.

89 Honda Civic-fuel pump-main relay [ 3 Answers ]

Have 89 Honda Civic with a carb. Car wouldn't start replaced main relay. However the fuel pump won't work from the main relay. So I bypassed the main relay for a temp solution. The main relay was brand new. I am looking for a permanent solution. Help! & Thanks


View more questions Search