Ask Experts Questions for FREE Help !
Ask
    curiousjo's Avatar
    curiousjo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2007, 10:28 AM
    Kenmore Elite Dryer Microcomputer
    My Kenmore Dryer won't run unless start button is held down manually, but even so, won't dry the clothes. From reading on this forum, the problem is probably the circuit board/computer, as these seem to get fried. The question I have is that Sears accidentally sent me the part when I first owned the dryer... but I am not sure it is the exact part for my dryer as the part number is one digit off. Does anyone know if part number 3978955 can be used in exchange for 3978954. My model number is 110.73956102.
    ptoma2000's Avatar
    ptoma2000 Posts: 13, Reputation: 1
    New Member
    		  
    #2

    Nov 4, 2007, 07:38 PM
    Have you looked at the part it is meant to replace ?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Nov 4, 2007, 08:04 PM
    According to www3.sears.com,. 954 is the correct part.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore elite Dryer - [ 3 Answers ]

My kenmore dryer starts the drying cycle then after about 2 - 5 minutes shuts off. It will restart after about 30 minutes. I have checked the thermal cut offs hi limit thermostats, etc. Any suggestions?

Kenmore elite dryer [ 4 Answers ]

My kenmore elite dryer is not getting hot what could be the problem? I was thinking it may be the heating coil, if so where would it be located? Any other suggestions?

Kenmore Elite Dryer [ 1 Answers ]

How do I light the pilot for this dryer?

Kenmore Elite Dryer [ 3 Answers ]

From time to time, I am able to select my drying selections, load size and all the settings but when I push START it only "clicks" and will not start. Then the next day, it is like it "resets" itself and works fine. There seems to be no reason when or why this occurs. Is there any reason why...

View more questions Search