Ask Experts Questions for FREE Help !
Ask
    knrecker's Avatar
    knrecker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 20, 2007, 07:19 PM
    Furnace size
    How to measure for furnace size
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Sep 20, 2007, 08:01 PM
    What is it that you are looking for in size. Do you want to know the BTU, or the AC capacity, or the capacity of air flow? CFM. Or do you need the electric power needed to operate it such as single phase or three phase.
    To get any of these answers you need to have some numbers, The Model number in most cases will supply you with this information, Send me some numbers and I will try to decipher them for you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Full size headboard, Queen size bed Frame [ 2 Answers ]

Where can I buy attachments that will allow me to fasten my full size headboard to my queen size bedframe? I am having a bit of trouble finding one.

Compatibilities between awg wiring, breaker amp size, outlet amp size [ 4 Answers ]

Hi. Is there a resource out there, prefereably on the web, that outlines the compatibilities between awg wiring, the breaker amp size, outlet amp size, how many recepticles/outlets can be on x amp outlet, etc? For example, it would be nice to see something that shows: you can use a 20 amp...

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search