Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Car won't start, no click and no power to radio, power window or locks
[ 6 Answers ]
After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...
Wiring a ceiling fan to a switch without power
[ 4 Answers ]
I just installed a new ceiling fan and want it to operate off an existing wall switch. The switch currently only operates a wall outlet in the same room. Apparently, the switch has no power, rather the power must be running to the wall outlet and then have a wire running to the switch. Is it...
Motor Control / Power Wiring Color
[ 11 Answers ]
I'm looking at adding magnetic starters to some of my woodworking tools to provide low-voltage protection because the power here isn't that stable. I need to purchase control wiring. Are there standard wire colors for a 3 wire control scheme / what are they / dictated by NEC / which article,...
Power Distribution Units & Remote Power Panel
[ 1 Answers ]
What is the basic functionality of these equipment ? What is differnce between PDU & RPP.
Wiring power transformer to furnace
[ 4 Answers ]
I have a lennox furnace & I am trying to replace my transformer. On my old transformer one side has a black wire coming out connecting to a black wire coming out of the furnace. On the same side there is a white wire connecting to a yellow wire on furnace. On the other side there is a red wire... View more questions Search
|