Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Floor Tile, Concrete floor is sealed.
[ 1 Answers ]
I want to replace carpet with tile on concrete floor but concrete is sealed with some coating. Do I have to prime this or remove sealant?
Removing Hardset Tile Mastic from Concrete Floor
[ 1 Answers ]
I need to remove a hardset ( not glue type) mastic from a large area of concrete floor. The mastic is almost as hard as the concrete and must be ground down in order to lay carpet. I am currently using a floor belt sander with hardest grade paper. It's moving at just about a snails pace. Is...
Water leak at floor near toilet mounting bolts
[ 2 Answers ]
We noticed occasional water seepage on floor near one of the mounting bolts. I assumed it was a faulty wax seal, so, we removed the toilet bowl, and replaced the seal. We thought the matter was resolved, but, then we observed that especially when there is weight on the toilet, water gushes from...
Removing stem bolts from tub faucets
[ 2 Answers ]
Good evening! I am trying to remove the bolts that hold the stems of the hot and cold water faucets on the tub. I'm using a cresent wrench and it's almost rounding the edges of the bolt. I've sprayed WD-40 in between the bolt and water pipes but they haven't budged yet... I'm trying to get the...
Raising a floor drain in concrete floor
[ 2 Answers ]
I have an old concrete floor with a newer pvc type drain. The floor slopes about 1.5" over 2' around the drain so I would like to raise the drain in order to level the floor to install ceramic tiles. I'm still going to ensure the floor slopes toward the drain just enough. I figure I need to... View more questions Search
|